Easy Load Ramp System

The Easy Load Ramp Support Stand is an adjunct product for the Easy Load Ramp Systems. It was designed for those folks whose trike transporting vehicle does not have a receiver hitch or for those...

The Easy Load Ramp Support Stand is an adjunct product for the Easy Load Ramp Systems. It was designed for those folks whose trike transporting vehicle does not have a receiver hitch or for those not wanting to incur the expense of buying and installing a hitch but wanting to use the unique ELRS. The top horizontal bar of the Stand acts as the Receiver Hitch Insert of the basic ELRS.Durable and compact the Stand when folded flat is 2” high and stores easily with the Ramps. The 17” arm is...

Note: In addition to the above Easy Load Ramp System.One longer RHI and one taller Ramp Support “T”. The ELRS-PU allows any of the three systems to be used as designed with the trucks tail gate open...

Note: In addition to the above Easy Load Ramp System.One longer RHI and one taller Ramp Support “T”. The ELRS-PU allows any of the three systems to be used as designed with the trucks tail gate open or in the horizontal position.

Everything about the ELRS-XL is the same as the description above for the ELRS except the Ramps. These Ramps are only 4’6” in length when stowed but they telescope to a maximum of 8’. There are...

Everything about the ELRS-XL is the same as the description above for the ELRS except the Ramps. These Ramps are only 4’6” in length when stowed but they telescope to a maximum of 8’. There are additional stops built in at 5’, 6’ and 7’ which are convenient for uneven terrain or driveways. The ELRS-XL is ideal for use with vehicles which are higher off the ground such as larger vans, SUV’s and pick-up trucks. Three Ramps are also available in the ELRS-XL. ...

This is our basic tray system and holds one tadpole type trike, Delta trike or hand cycle. The trike transporting vehicles 2” receiver hitch must have a ground clearance or 16”. If not, a riser is...

This is our basic tray system and holds one tadpole type trike, Delta trike or hand cycle. The trike transporting vehicles 2” receiver hitch must have a ground clearance or 16”. If not, a riser is required to make it so. If a riser is required then it must also have a second Hitch Tite to secure it from moving. The ELT comes with running and brake lights as well as turn signals. Power to the lights is supplied through either a flat four pin or a round seven blade connector. Easy Load will...

Everything about the ELRS-XLW is the same as the description above for the ELRS-XL except the Ramps. These ramps are ~5” wide and designed for Fat Tire Trikes. They are also an excellent choice for...

Everything about the ELRS-XLW is the same as the description above for the ELRS-XL except the Ramps. These ramps are ~5” wide and designed for Fat Tire Trikes. They are also an excellent choice for loading hand cycles. The 5” width of the ramp is an easier “target” for a person to load a hand cycle from a wheel chair. The 5” width prevents the spokes on a camber wheeled hand cycle from rubbing on the Ramp sidewalls. Three Ramps are also available in the ELRS-XLW. ...

This single upright bicycle rack is designed to be mounted on either the ELT or the ELT-XL Easy Load Tray RackThe Bike Rack carries one upright bike and is attached to the Receiver Hitch Insert of...

This single upright bicycle rack is designed to be mounted on either the ELT or the ELT-XL Easy Load Tray RackThe Bike Rack carries one upright bike and is attached to the Receiver Hitch Insert of either the ELT or the ELT-XL. The attach point is clearly marked on the RHI with a sticker in white letters. The bike rack shown is our proof of concept model. As such it is not painted but it does show concept and attach point. The Bike Rack is tall enough to allow a 20” front wheel of a recumbent...

The ELRS is our basic ramp system this system consists of 2 Ramps, 1 Ramp Support “T” (“T”) and 1 Receiver Hitch Insert (RHI). The ramps are 5’ in length with side walls ~2” in height and they are...

The ELRS is our basic ramp system this system consists of 2 Ramps, 1 Ramp Support “T” (“T”) and 1 Receiver Hitch Insert (RHI). The ramps are 5’ in length with side walls ~2” in height and they are ~3” wide. There is a 2’ Ramp Extension which nests outside the Ramp and flips over onto the floor of the vehicle to which the trike will be loaded. The Ramp has a U channel latch which fits over the horizontal bar of the “T”. The “T” fits into the RHI which is inserted into the vehicles 2” receiver...